Harness Kit Fit FAQ: Straps, Sizing, and Adjustment
Answers to the most common CoyoteVest Harness Kit fit questions, from choosing the right size to checking that the Velcro band and safety strap are secure.
Harness Kit Fit Questions
Which Harness Kit size do I need for my vest?
The Harness Kit comes in Extra Small, Small, and Medium. The Extra Small kit fits both XXS and XS vests, so if your dog wears an XXS or XS CoyoteVest or SpikeVest, choose Extra Small. For Small and Medium vests, select the matching kit size. At this time, a Harness Kit is not offered for large vests.
How tight should the Velcro band be?
The wide Velcro band should sit flat against the back of the vest with full contact along its length. Testing shows the band can withstand pulling forces that greatly exceed the weight of the dog wearing it, so you do not need to over-tighten it. Press the band firmly into place and check that it does not lift at the edges when you gently tug the new D-ring.
What is the safety strap for, and how do I check it?
The new relocated D-ring is attached to the original sewn-in D-ring with a safety strap, similar to safety chains on a trailer hitch. This means that even in the unlikely event the Velcro does not hold, the leash remains connected to the original D-ring. After installation, confirm the safety strap is connected and lies flat without twists.
Can I use the Harness Kit on a HawkShield?
No. The Harness Kit cannot be used on a HawkShield, which is purposely designed to release easily. It is intended only for CoyoteVest and SpikeVest models.
Will the Harness Kit interfere with accessories on the back of the vest?
You can continue to use any accessories you have mounted on the back of the vest, but you may need to rearrange them to accommodate the new leash placement. Plan for a little extra room around the new D-ring location.
What if the Harness Kit does not seem to fit securely?
Double-check that you selected the correct size for your vest and that the Velcro band is pressed firmly along its full length. If the band still does not sit flat, the supplied information does not include additional troubleshooting steps, so contact CoyoteVest support for guidance.
Harness Kit Details That Affect Fit
Harness Kit: The Harness Kit attaches a new D-ring to the back of a CoyoteVest or SpikeVest with a wide Velcro band and does not require any openings that would compromise the safety of the vest. This explains why fit depends on Velcro contact rather than straps or buckles, and why no vest modification is needed.
Harness Kit
Harness Kit: The new relocated D-ring is attached to the original sewn-in D-ring with a safety strap, just like safety chains on a trailer hitch. The safety strap is your backup connection, so checking it is part of every fit check.
Harness Kit: The size Extra Small Harness Kit fits both XXS and XS vest. This prevents the common mistake of ordering a separate kit for an XXS vest.